Mixer Menu - NFUZD Audio NSPIRE series User Manual

Quick Nav
Table of Contents
Introduction
I/O Module Panel Layouts
Snare and Tom Trigger Zones
NFUZD USB Key (Drive) and Data Management
NSPIRE Series I/O Module Navigation
Trigger Settings
Hi-Hat (HH) Trigger Settings
Kit Menu
Reverb
EQ

Mixer Menu

Saving a UserKit
Adjusting the MIDI Map
Trigger Function Settings
Click Menu
SEQ Menu
Integration with Computer
Setup Suggestions
Sync Key
Auto Off and Sleep Mode
BFD Eco NFUZD Edition
NSPIRE Series I/O Module Settings
Getting Started w/ BFD Eco NFUZD Edition
Basic Mixing Adjustments
BFD Eco NFUZD Edition Effects
Grooves Page
Options Menu
Help Menu
Changing BFD Eco NFUZD Edition Presets
Changing Drum Sounds
Adjusting Instrument Parameters
FX Slots
Instrument and Mixer Faders
Getting New Professional Sounds
User .wav Samples
Exporting Sound Banks
Loops
Installing Sound Banks
BFD Eco Jukebox Player
BFD Eco Master Output Recording
BFD Eco Mixing Tips
Included Sounds
Mixer Menu
Press the MIXER button and the first screen is the master volume for Master Outputs. Rotating the
DATA DIAL raises and lowers the volume.
* Note: The Master Volume is controlled by this function on the main MIXER page. The Direct 1 and
Direct 2 outputs get their volume directly from each kit piece.
* The knob at the top left corner of the NSPIRE module is the headphone volume.
F1 (PAN)
C0 = Center. Strike the pad to highlight the instrument and the DATA DIAL to change the value.
Press F3 (BACK) to go back to the main MIXER page.
* Note: These panning adjustments all appear in this one simple page. They are also available for
each instrument in the KIT/INST/EDIT page.
2 6