Saving Trigger Settings - NFUZD Audio NSPIRE series User Manual

Quick Nav
Table of Contents
Introduction
I/O Module Panel Layouts
Snare and Tom Trigger Zones
NFUZD USB Key (Drive) and Data Management
NSPIRE Series I/O Module Navigation
Trigger Settings
Hi-Hat (HH) Trigger Settings
Kit Menu
Reverb
EQ
Mixer Menu
Saving a UserKit
Adjusting the MIDI Map
Trigger Function Settings
Click Menu
SEQ Menu
Integration with Computer
Setup Suggestions
Sync Key
Auto Off and Sleep Mode
BFD Eco NFUZD Edition
NSPIRE Series I/O Module Settings
Getting Started w/ BFD Eco NFUZD Edition
Basic Mixing Adjustments
BFD Eco NFUZD Edition Effects
Grooves Page
Options Menu
Help Menu
Changing BFD Eco NFUZD Edition Presets
Changing Drum Sounds
Adjusting Instrument Parameters
FX Slots
Instrument and Mixer Faders
Getting New Professional Sounds
User .wav Samples
Exporting Sound Banks
Loops
Installing Sound Banks
BFD Eco Jukebox Player
BFD Eco Master Output Recording
BFD Eco Mixing Tips
Included Sounds

Saving Trigger Settings

Make sure you have your NFUZD USB Key installed in the module.
1. Press the SET button on the bottom right of the I/O module.
2. Use the F2 button and move down to the Write Protect line.
Use the DATA DIAL to change the value to OFF.
3. Use F2 to scroll down to the Save Trig. parameter.
4. Hold the F3 (EXEC) button for one second.
5. The next screen that pops up gives you the ability save your settings.
Turning the DATA DIAL will select between Trigger and MIDI.
6. Select the Trigger User Position you wish to use.
There are five positions per NFUZD USB Key.
7. Scroll down to write a small eight character name for your saved setting.
8. Press F3 (EXEC) to save your setting.
You will then see a screen showing the word "Done!" to indicate that you
have saved the trigger settings.
This new Trigger Preset will replace the Factory preset.
* Note: There are five positions for Trigger that can be saved to the USB Key.
If you are in the name screen and wish to abort for any reason, press the SET
button again to return to the main SET screen.
1 8