Advertisement
Drain the engine oil while the engine is still
warm.
Open
(1)
(1) Engine oil filler cap (D13A engine)
(2) Engine oil filler cap (D16AA engine)
1) Remove the oil filler cap.
2) Place a drain pan under the drain plug.
3) Using a wrench, remove the drain plug
and drain out the engine oil.
Close
(2)
64MS151
4) Reinstall
the
gasket.
Tighten
wrench to the specified torque.
NOTE:
Since special procedures and tools are
required, it is recommended that you trust
this
1) Using a socket or a ring spanner
60G306
2) Remove the old oil filter element and
3) Clean the surface of oil filter cap and
4) Tighten the oil filter housing cover on
drain
plug
the
plug
with
a
job
to
your
.
remove oil filter housing cover (3).
(1)
(3)
(1) Loosen
(2) Tighten
replace it with a new oil filter element.
replace the O-ring.
the oil filter housing using a socket or
ring spanner to the specified torque.
(2)
61M7001
Advertisement
