Advertisement
The blower speed selector (2) is used to
turn on the blower and to select blower
speed.
If the "AUTO" switch (8) is pushed, the
blower speed will vary automatically as the
climate control system maintains the
selected temperature.
(a)
(b)
Push the air intake selector (3) to change
between the following modes.
If the "AUTO" switch (8) is pushed, the air
intake will vary automatically as the climate
(2)
control system maintains the selected tem-
perature.
NOTE:
When you select the recirculated air mode,
the automatic operation system is deacti-
vated if you push the "AUTO" switch (8).
64MS052
When this mode is selected, outside air is
shut off and inside air is recirculated. This
mode is suitable when driving through an
area with polluted air such as a tunnel, or
when attempting to quickly cool down the
vehicle.
When this mode is selected, outside air is
introduced.
The "FRESH AIR" position (b) and RECIR-
CULATED AIR position (a) are selected
alternately each time the air intake selector
is pushed.
NOTE:
If you select the RECIRCULATED AIR
(3)
position (a) for an extended period of time,
the air in the vehicle can become contami-
nated. Therefore, you should occasionally
select the "FRESH AIR" position (b).
64MS053
(c)
(d)
(e)
(f)
Push the "MODE" switch (4) to change
among the following functions. The indica-
tion of the selected mode appears on the
display.
If the "AUTO" switch (8) is pushed, the air
flow will vary automatically as the climate
control system maintains the selected tem-
perature.
(4)
64MS054
61M0100
Advertisement
