Advertisement
NOTE:
In the presence of strong radio signals or
noise, you may not be able to change the
ignition mode to ACC or ON or to start the
engine using the engine switch. In this
case, the information display on the instru-
ment cluster will show the following mes-
sage: KEY FOB NOT DETECTED.
If the steering lock remains engaged when
you press the engine switch to change the
ignition mode to "ON", the information dis-
play in the instrument cluster shows the
message: "TRN. STEERING WHEEL TO
RELEASE LOCK". Refer to "Information
Display" in the
tion for details.
NOTE:
The steering lock may not be released if
some load is acting on the steering wheel.
If this happens, turn the steering wheel to
the right or left to relieve it from the load
before you press the engine switch again
to change to the desired ignition mode.
Provided the keyless push start system
remote controller is within the "interior
workable area" (refer to the related expla-
nation in this section), you can use the
engine switch for starting the engine and
selecting an ignition mode (ACC or ON). In
addition, the following functions can be
used:
• Keyless entry function. Refer to "Keyless
Push Start System Remote Controller" in
the "BEFORE DRIVING" section for
details.
• Locking and unlocking doors (including
sec-
the tailgate) using a request switch.
Refer to "Keyless Push Start System
Remote Controller" in the "BEFORE
DRIVING" section for details.
• Immobilizer (anti-theft) function. Refer to
"Immobilizer System" in the "BEFORE
DRIVING" section for details.
The engine switch is illuminated (lit) in the
following situations:
• When the engine is off and the driver's
door is open or for 15 seconds after the
drivers door is closed.
• When the engine is off and the position
lights are on. The illumination will go out
when the position lights are turned off.
• When the engine is on and the position
lights and/or the headlights are on. The
illumination will go out when the head-
lights are turned off.
NOTE:
To save the battery, the illumination will be
automatically turned off when both of the
following conditions are simultaneously
met:
• The headlights and position lights are
turned off.
• A period of 15 minutes has elapsed after
opening the driver's door.
Press the engine switch to select the
"ACC" or "ON" mode as follows when you
use an electric accessory or check the
operation of instruments without running
the engine.
1) Bring the keyless push start system
remote controller with you and sit in the
driver's seat.
82K253
Advertisement
