About Color Temperature - Mitsubishi Electric DLP XD460U User Manual

Adjusting projected images (continued)
To adjust the tone of white (COLOR TEMP.):
You can select a preset color temperature (white tone) using the menu.
(See Page 22 for menu setting.)
1. Display the IMAGE menu.
2. Select COLOR TEMP. by pressing the
3. Select your desired color temperature by pressing the
To cancel the menu:
4. Press the MENU button.
To adjust the tone of white (To customize the color temperature):
To customize (and store) the color temperature to your preference, carry out the following procedure.
(See Page 22 for menu setting.)
1. Select COLOR TEMP. in the IMAGE menu.
2. Press the or button to select USER
3. Press the ENTER button.
4. Press the or button to select the desired item.
5. Press the or button to adjust the selected item.
6. Repeat steps 4 and 5 for optimum adjustment results.
To cancel the menu:
7. Press the MENU button.
To enable the stored color temperature:
1. Set COLOR TEMP. to USER

About color temperature

There are different kinds of white color. Color temperature is a way to show the differences in white. White of which
temperature is low appears reddish. When the color temperature rises, white appears bluish. For example, you can
change the color temperature using the following procedures.
To rise the color temperature: Increase the CONTRAST B (blue) and decrease the CONTRAST R (red).
To reduce the color temperature: Decrease the CONTRAST B (blue) and increase the CONTRAST R (red).
• If you set all of CONTRAST R, G, and B to negative values, the original brightness of the image can't be
obtained even when you maximize CONTRAST in the IMAGE menu.
Color Enhancer
To set the user-defi ned balance between the brightness and hue (Detailed descriptions of the color enhancer)
You can set the user-defi ned balance between the brightness and hue using the menu. (See Page 22 for menu
setting.)
1. Display the IMAGE menu.
2. Select COLOR ENHANCER by pressing the
3. Select USER by pressing the
4. Press the ENTER button.
5. Select an item you want to set.
GAMMA mode
Use this item to set the gamma optimally.
DYNAMIC ...... Select when viewing images supplied from the computer.
NATURAL ...... Select when viewing images supplied from the video device.
DETAIL ......... Select when viewing images of which brightness should be kept relatively low, such as movies and
music performance.
Brilliant Color
Use this item to make the colors having medium brightness such as yellow and
skin tone look natural. The effect of this item increases as the
and it decreases as the
work.)
6. Select a setting value by pressing the
• You can adjust Color Enhancer also by pressing the CE button on the remote control.
EN-26
or button.
.
in the IMAGE menu.
or
or button.
button is pressed. (When set to 0, Brilliant Color doesn't
or button.
or button.
button.
button is pressed,
COLOR TEMP.-USER
CONTRAST R 0
CONTRAST G 0
CONTRAST B 0
BRIGHTNESS R 0
BRIGHTNESS G 0
BRIGHTNESS B 0
AUTO
COLOR ENHANCER
COLOR ENHANCER-USER
GAMMA MODE DYNAMIC
BRILLIANT COLOR 10