Setting The Aspect Ratio; How To Change The Settings; With Remote Control/Feature Menu - Mitsubishi Electric DLP XD460U User Manual

Setting the aspect ratio

You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the
setting according to the type of the input video signal.
AUTO
Changes the aspect
ratio according to
Original image size
the type of the input
signal.
4:3 image (480i, 576i,
480p, 576p, and PC)
4:3 CinemaScope and
Vista image
Squeezed 4:3 (480i,
576i, 480p, 576p)
16:9 image (1080i)
16:9 image (720p)
Bold frames are recommended modes.
* : The REAL mode may not function depending on the input signal. For more details, refer to page 38.

How to change the settings:

With the remote control:
1. Press the ASPECT button.
• Every time the ASPECT button is pressed, the aspect mode changes from AUTO to 16:9 , to REAL, and back
to AUTO.
• When the keystone adjustment is applied, the REAL mode can not be selected.
With the FEATURE menu:
(See Page 22 for menu setting.)
1. Display the FEATURE menu.
2. Select ASPECT by pressing the
3. Select your desired aspect ratio by pressing the
When AUTO or 16:9 is selected only.
4. Press the ENTER button.
5. Select your desired position by pressing the
To cancel the menu:
6. Press the MENU button.
Important :
• When a 16:9 image is kept displayed for a long time before displaying 4:3 image, the afterimages of the black bars
may appear on the 4:3 image screen. Consult your dealer in this case.
16 : 9 REAL*
Projects images Projects images in
with an aspect their original size
ratio of 16:9. as input.
Not available.
Not available.
or button.
or button.
or button.
opt.
XGA60
FEATURE
ASPECT AUTO
PASSWORD
DISPLAY
FUNCTION
INPUT
MENU POSITION 1.
AUTO
CINEMA MODE
?
AUTO
VIDEO SIGNAL
EN-21