Charge The Battery - AT&T 5806 User Manual

91-5785-10-ATT5806-manual

CHARGE THE BATTERY

1 Install the handset battery pack.
Use only the battery supplied with this handset or AT&T Accessory
Battery Model 2401, SKU#91077.
• When you install the battery pack the first time, the handset will
display ENTER BASE ID.
2
a) Remove battery
compartment cover by
pressing on indentation
and sliding downward.
Charge the handset battery.
• Place the handset in the
remote charging stand.
The CHARGING light
goes on.
• Charge the battery at least
12 hours. After the first
charge, the battery typically
charges in only eight hours.
2
5/25/04 3:51 PM Page 2
b) Align the contacts and place
c) Replace cover by
the battery pack in the
battery compartment.
sliding it on its
track up over
battery case until
it snaps firmly into
place.