Ford f-650 2013 Owner's Manual page 227

226
CLUTCH FLUID AND LINKAGE
Clutch Fluid
WARNING: Carefully read cautionary information on product
label. For MEDICAL EMERGENCY INFORMATION, contact a
physician or Poison Control Center immediately; on Ford-Motorcraft®
products call: 1-800-959-3673 (FORD). Failure to follow these
instructions may result in personal injury.
Use only a DOT 3 brake fluid designed to meet manufacturer
specifications. See the Capacities and Specifications chapter.
During normal operation, the fluid level in the clutch reservoir should
remain constant. If the fluid level drops, fill to the step in the reservoir.
6. Reinstall rubber diaphragm and cap onto reservoir.
See the Scheduled Maintenance chapter for service intervals.
2013 F-650/750 (f67)
Owners Guide gf, 1st Printing, October 2012
USA (fus)
Maintenance
1. Set the parking brake, shift into
first gear and turn the engine
off.
2. Open the hood.
3. Clean the reservoir cap before
removal to prevent dirt and
water from entering the
reservoir.
4. Remove cap and rubber
diaphragm from reservoir.
5. Add fluid, if necessary, until it
reaches the step in the reservoir.