Canon Legria mini X Instruction Manual page 269

Trouble?
Multiple access points detected. Try the operation again.
- There are multiple access points sending out a WPS signal
at the same time. Try the operation again later or perform
setup using the [WPS: PIN Code] or [Search for Access
Points] option (A 204).
No access points found
- The access point set in the camcorder could not be found.
- Cordless phones, microwave ovens, refrigerators and other
appliances may interfere with the wireless signal. Try using
the camcorder in a location farther away from such appli-
ances.
- Make sure that you use the access point's SSID for the cam-
corder's Wi-Fi settings (A 208).
- If the access point is using MAC address filtering, enter the
camcorder's MAC address in the access point's configura-
tion screen.
The access point is not compatible with UPnP
- An access point compatible with UPnP (Universal Plug and
Play) was not found in the connected network. You must
use an access point compatible with UPnP. If your access
point is compatible, make sure UPnP is activated.
Unable to access configuration files
- Turn off the camcorder. After a short while, turn it on again. If
the problem persists contact a Canon Service Center.
269