Condensation - Canon Legria mini X Instruction Manual

Maintenance/Others

Condensation

Moving the camcorder rapidly between hot and cold tempera-
tures may cause condensation (water droplets) to form on its
internal surfaces. Stop using the camcorder if condensation is
detected. Continued use may damage the camcorder.
Condensation may form in the following cases:
• When the camcorder is moved quickly from cold to warm
places
• When the camcorder is left in a humid room
• When a cold room is heated rapidly
To avoid condensation
• Do not expose the camcorder to sudden or extreme changes
in temperature.
• Remove the memory card and battery pack. Then, place the
camcorder in an airtight plastic bag and let it adjust gradually
to temperature changes before removing it from the bag.
When condensation is detected
The precise time required for water droplets to evaporate will
vary depending on the location and weather conditions. As a
general rule, wait for 2 hours before resuming use of the cam-
corder.
284