Canon Legria mini X Instruction Manual page 268

Trouble?
List of Messages for Wi-Fi Functions
Refer also to the instruction manual of your access point and
other devices you will use.
Another user is already controlling the camcorder. Try again
later.
- This message appears on the screen of the Wi-Fi device.
Multiple Wi-Fi devices are trying to connect with the cam-
corder. Make sure only one Wi-Fi device is trying to connect
and then touch Retry.
Invalid port number. Perform the setting again.
- The port number entered cannot be used. In the settings for
the Monitor while Out function (A 181) change the port
number to a port that does not conflict with other devices.
IP address conflict
- Change the camcorder's IP address to avoid any conflict
with devices connected to the same network. Alternatively,
change the IP address of the conflicting device.
Memory card cover is open
- The memory card cover was opened while the memory card
was being accessed. Stop the Wi-Fi function in use and end
the Wi-Fi connection.
268