Panasonic Lumix DMC-G5X Basic Operating Instructions Manual page 93

Note
•
If approximately 1 minute elapses without an operation being performed, part of the display will
disappear. Press [DISP.] or touch the LCD monitor to make the display reappear.
About the tilt sensor display
∫
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.
1
Press [DISP.] to display the tilt sensor.
2
Check the tilt of the camera.
A Horizontal direction:
Correcting tilt to the left
B Vertical direction:
Correcting downward tilt
•
When the tilt of the camera is little, the indicator changes to green.
•
When recording with a vertical orientation, the display automatically switches to a vertically
orientated display.
Note
•
Even after correcting the tilt, there may still be an error of approximately ± 1°.
•
When [Fn Button Set] of the [Custom] menu is set to [Level Gauge], you can switch the tilt sensor
display on/off by pressing function button.
•
When tilted significantly upwards or downwards to record, the tilt sensor display may not be
displayed correctly, and the Direction Detection Function

Basic
(P33) may not work correctly.
- 41 -
