Panasonic Lumix DMC-G5X Basic Operating Instructions Manual page 123

[Travel Date]
•
The number of days that have passed since the departure date can be printed out using the
"PHOTOfunSTUDIO" bundled software on the CD-ROM (supplied).
•
The travel date is calculated using the date in the clock setting and the departure date you set. If you
set [World Time] to the travel destination, the travel date is calculated using the date in the clock
setting and the travel destination setting.
•
The travel date setting is memorised even if the camera is turned off.
•
The [Travel Date] feature is disabled when recording [AVCHD] motion pictures.
•
While recording motion pictures, the [Location] feature is disabled.
[Beep]
•
The [E-Shutter Vol] only works when [SH] for Burst Mode or [Electronic Shutter] is set to [ON].
[Volume]
•
When you connect the camera to a TV, the volume of the TV speakers does not change.
Departure date and return date of the trip as well as the name of the
travel destination can be set.
You can display the number of days that have passed when playing
back the pictures and stamp it on the recorded pictures with [Text
Stamp] (P179).
[Travel Setup]:
[SET]: Departure date and return date are set. Elapsed days
(how many days after) of the trip are recorded.
[OFF]
•
The travel date is automatically cancelled if the current date is after the
return date. If the [Travel Setup] is set to [OFF], [Location] will also be
set to [OFF].
[Location]:
[SET]: Travel destination is recorded at the time of recording.
[OFF]
•
For details on how to enter characters, refer to
Set the volume for electronic noises and the electronic shutter noise.
[Beep Volume]:
[u] (High)
[t] (Low)
[s] (OFF)
Adjust the volume of the speaker to any of the 7 levels.
Basic
[E-Shutter Vol]:
[
[
[
- 71 -
"
Entering Text
] (High)
] (Low)
] (OFF)
"
on P146.