Setting The Menu; Using The Viewfinder; Switching The Lcd Monitor/Viewfinder - Panasonic Lumix DMC-G5X Basic Operating Instructions Manual

Using the Viewfinder

Switching the LCD monitor/Viewfinder

About the eye sensor automatic switching
∫
When [LVF/LCD Auto] of [Eye Sensor]
or an object is brought close to the viewfinder, the display automatically switches to the
viewfinder display.
Sensitivity of the eye sensor can be set to [HIGH] or [LOW] with [Sensitivity].
•
Eye sensor might not work properly depending on the shape of your eyeglasses, the way you hold
the camera, or bright light shining around the eyepiece. Switch manually in that case.
•
The eye sensor is disabled during motion picture playback and slide show.
Switching the LCD monitor/Viewfinder manually
∫
[LVF/LCD/Fn3] button can be used in two ways, as [LVF/LCD] or as [Fn3] (function 3). At the
time of purchase, it is initially set to [LVF/LCD].
•
To switch the setting, select using [LVF/LCD / Fn3] in [Custom] menu.
•
Refer to P113 for details about the function button.
Press [LVF/LCD] to switch the monitor screen.
A [LVF/LCD/Fn3] button
B Eye sensor
•
When [LVF/LCD / Fn3] in the [Custom] menu is set to [Fn3], use
the eye sensor to switch between the LCD display and the
viewfinder.
∫ Diopter adjustment
Adjust the diopter to suit your vision so that you can see the
characters displayed in the viewfinder clearly.
Basic
(P170) in the [Custom] menu is set to [ON] and your eye
- 34 -