D-Link DWS-3160 Configuration Manual page 5

Unified switch

Hide thumbs Also See for DWS-3160:

4-2. Install the required package (the table listed in above)

Use the following command to install freeradius, postgresql, and the libraries. In default, the

installation path for FreeRADIUS is /etc/raddb.

-----------------------

yum install postgresql-server postgresql-libs freeradius freeradius-postgresql freeradius-utils

-----------------------

4-3. Configure FreeRADIUS. All configuration files for FreeRADIUS will be stored under

/etc/raddb.

Add the management VLAN in the FreeRADIUS. Edit /etc/raddb/client.conf. Add shared secret

for each client or each subnet. And save.

The fill in information is as below:



short_name : the name of this entry



secret : the secret for to this entry



ipaddr and netmask : the ip address for this entry, you can specify an address or a subnet

The red items are the options you can edit

---------------------------------------

client short_name{

secret =

shared_secret

ipaddr =

192.168.0.0

netmask =

How to Configure a BYOD Environment with the DWS-3160