D-Link DWS-3160 Configuration Manual page 21

Unified switch

Hide thumbs Also See for DWS-3160:

2. (Option) Enable PoE on the ports which connect with APs if needed. In default, all ports are

enabled auto PoE detection.

Configuration Steps (DSR-500N)

1. Set up VLANs based on the network architecture. Create three VLANs. VLAN1 is the default

VLAN for AP management and external RADIUS server, VLAN2 is for the user using corporate-

provided NB with full access on internal resources (for example, internet and printer), and

VLAN3 is for the user using private NB with limited access (for example, internet).

1-1. Set up VLAN2 and VLAN3. Navigate to SETUP> VLAN Settings> Available VLANs.

How to Configure a BYOD Environment with the DWS-3160