D-Link DWS-3160 Configuration Manual page 20

Manage AP. Navigate to WLAN> DWS-4026> Monitoring> Access Point> All AP Status.
Configuration Steps (DGS-1210)
1. Set up VLANs based on the network architecture. Create three VLANs. VLAN1 is the default
VLAN for AP management and external RADIUS server, VLAN2 is for the user using corporate-
provided NB with full access on internal resources (for example, internet and printer), and
VLAN3 is for the user using private NB with limited access (for example, internet). As DWS-3160
VLAN1 is un-tag VLAN, set VLAN1 as un-tag VLAN on switch. The VLAN table is as below.
VLAN1
VLAN2
VLAN3
How to Configure a BYOD Environment with the DWS-3160
Port1 Port2
Un-tag Un-tag
Tag -
Tag -
Port3 Port4
Un-tag -
- Un-tag
- -
Port5
Un-tag
Tag
Tag