Mitsubishi Electric XD435U XD435U-G User Manual page 20

5 SIGNAL
HORIZ. POSITION......................................Use to adjust the horizontal position of the image.
VERT. POSITION........................................Use to adjust the vertical position of the image.
FINE SYNC. ...............................................Use to synchronize the projector with the PC input signal
TRACKING..................................................Use to eliminate image noise such as wide stripes.
COMPUTER INPUT ...................................The projector adjusts its settings automatically when
SET UP .......................................................When OFF is selected, the black area becomes make
HOLD .........................................................Use to adjust the image when flagging occurs near the top of the screen.
6 SIGNAL - USER (No need to adjust in normal use.)
CLAMP POSITION/
CLAMP WIDTH...........................................Use to correct solid white or solid black in the projected
Important:
• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.
EN-20
so that the image is not blurred.
connected to a DVD player equipped with a component
video output (Y, C , C ). When the projector is connected
B R
with a device having an RGB terminal, choose RGB
manually.
lighter. When 3.5% or 7.5% is selected, the black area
becomes thicker.
image.
opt.
XGA60
SIGNAL
HORIZ. POSITION
VERT. POSITION
FINE SYNC.
TRACKING
COMPUTER
RGB
INPUT
R G B
R G B
SET UP 7.5%
ON
HOLD
USER OK
USER
CLAMP
POSITION
CLAMP WIDTH
0
0
0
0
0
1