Operating The System By Using A Voice Command; Operation Procedure When Using A Voice Command; Auxiliary Commands When Using A Voice Command; Using The Hands-Free Phone System For The First Time - Toyota fj cruiser 2012 Service Manual

3-4. Using the hands-free phone system (for cellular phone)

Operating the system by using a voice command

By following the voice guidance instructions output from the speaker,
voice commands enable the operation of the hands-free phone sys-
tem without the need to check the display or operate
■

Operation procedure when using a voice command

Press the talk switch and follow the voice guidance instructions.
■

Auxiliary commands when using a voice command

The following auxiliary commands can be used when operating the
system using a voice command:
"Cancel": Exits the hands-free phone system
"Repeat": Repeats the previous voice guidance instruction
"Go back": Returns to the previous procedure
"Help": Reads aloud the function summary if a help comment is
registered for the selected function

Using the hands-free phone system for the first time

Before using the hands-free phone system, it is necessary to register
a cellular phone in the system. The phone registration mode will be
entered automatically when starting the system with no cellular
phone registered. Follow the procedure below to register a cellular
phone:
Press the off-hook switch or the talk switch.
The introductory guidance and phone name registration instructions
are heard.
Select "Pair Phone" using a voice command or
300
I n f o r ma t i o n P r o v i d e d b y :
.
.