Samsung MWR-WE10N User Manual page 10

Classification Button
⑨
Air
Conditioner Away / Motion detect
⑩
Related
Information
⑪
Outdoor air intake
⑫
⑬
⑭
Navigational buttons Move between items or change the item value
⑮
⑯
⑰
Special
Function
⑱
Displays Auto Clean button
⑲
CO
⑳
Filter Reset button
S-Plasma Ion button Choose the S-Plasma Ion function
Operation On/Off
Ventilator
(ERV)
Fan speed button
Related
Buttons
• After cleaning the filter, please press the Filter Reset button. The
will be turned on again upon the next cleaning period.
• If you press a functional button not supported by the indoor unit, then the
on.
• If the temperature display setting is set to indoor temperature and you press the Temp. button,
the lamp display will appear. (When you install the Wired Remote Controller, the setting is
available.)
• If you press the On/Off
Controller, then the air conditioner and the Ventilator(ERV) might operate or stop at the same
time or only the air conditioner might operate or stop. The factory setting is set to simultaneous
operation/stop. (When you install the Wired Remote Controller, the setting is available.)
• Although the air conditioner and the Ventilator(ERV) are set to simultaneous operation/stop,
you can individually control the air conditioner and the Ventilator(ERV) by using another controller
(e.g. wireless remote controller, central controller, S-net mini) except for a Wired Remote Controller.
Blade button Selects a blade for individual control
Selects when no one is detected in an indoor area, when the air conditioner
sensor button needs to be turned off automatically, when the AWAY operation is set;
Select the MINI AHU indoor unit Outdoor intake function
Schedule Button Select the schedule setting function
User Set Button Select the detailed setting function
Set button Save your new settings
ESC button Return to general mode from schedule and detailed setting screens
Delete button Cancel the schedule setting
Use the auto cleaning function for your air conditioner
/[kWh] button Display the amount of CO
2
Turn off the filter cleaning displays (filter using time reset)
Turn the Ventilator(ERV) On/Off
button
Mode button Select the desired operation for the Ventilator(ERV)
Change the fan speed for your Ventilator(ERV)
E.Saver button Begin Energy Saving Operation
Clean up button Select air purification through the in/out load controls
button when your Ventilator(ERV) is connected to a Wired Remote
Function
and the power consumption
2
lamp will turn off, and it
lamp will turn
9