Mitsubishi FX0N-232ADP User Manual page 7

Connect 232ADP and a personal computer,and exchange data with the PC.
Personal computer
Send
Receive
• Send data
• Receive data
Use the communication cable suited to the connector pin
configuration of the personal computer.
(For representative wiring see section 4.)
FX series sequencer
0N
• Receive data
• Send data
Preparation of software
Use ordinary communication software (terminal
emulator) or dedicated program in the personal
computer.
The communication format of the PC for this example
is as follows.
Data length
Parity
Stop bit
Baud rate
If the communication format of the software cannot be
adjusted to this setting, adjust the PC and the software
to be the same.
8 bit
Even
1 bit
2400