Mitsubishi 738 Basic Owner's Manual page 33

738 / 838 series home-cinema television
Table of Contents

Advertisement

Appendices
33
Common
Picture Problems
Picture does not look like a high-defi-
nition picture.
TV has sound but no picture.
Picture has become dimmer.
A color program appears as a black
and white image, or the colors are
dim, or the screen is black.
Picture from an HDMI input is noisy
(poor quality).
Compare the picture to the TV's test picture (Picture > Picture+
>
Test Picture) to check if the source signal is supplying a lesser-quality
image.
Not all signals are high-definition
signals. To receive high-definition
programming
from your cable or satellite provider, you must subscribe
to the provider's high-definition
service.
Some over-the-air broadcasts
are in high-definition
and can be received with a high-quality antenna
suited to your location.
Press MENUon the remote control.
If the menu displays, then there
is a problem with the incoming signal.
Check that all video inputs are plugged in firmly to the correct input
jacks.
Press and hold the POWER button on the control panel for ten
seconds to perform System Reset.
The lamp is nearing the end of its life. Order a new lamp.
Adjust picture brightness and contrast to maximum levels.
Change Lamp Energy from Standard
to Bright.
if using component
video, check that the red, green, and blue input
cables are correctly connected
to the red, green, and blue compo-
nent video jacks.
=
if using composite video, check that the incoming cable is con-
nected the TV's green Y/ViDEO jack.
=
838 Series. The PerfectColor color balance has been incorrectly
set. Reset the PerfectColor
balance.
Compare the picture to the TV's test picture (Picture > Picture+
>
Test Picture) to check if the noise is internal or external to the TV.
Upgrade a Category 1 (unmarked) HDMI cable to a newer type of
high-speed
HDMI cable.
Home Network
.
2.
3.
I cannot connect the TV to the
network.
I plugged in a wireless USB adapter,
but the wireless connection
is not
working.
The INTERNET key only goes to
VUDU.
Go to the Setup > Network
menu. Obtain the TV MAC address and
3rovide it to the router.
The network may be locked.
Go to Setup > Network.
Highlight the
network name and supply the pass code.
Normal operation.
The TV receives all internet services through VUDU.
The TV does not provide full internet access as does a web browser on
a computer.
For assistance
call 1(800} 332-2119

Advertisement

Table of Contents
loading

Table of Contents