Continuous Measuring - Agatec DM100 Owner's Manual

9.2 Continuous measuring

See drawing J:
This function enables distances to be staked out.
Hold key 4 for several seconds.
Continuous measuring starts.
Press key 4 briefly.
Continuous measuring stops.
The value last measured appears in the summary row.
10 Functions
10.1 Add/Subtract
Add:
Measure the first distance.
Press key 5 once.
The device adds the second measuring result to the first measuring result.
Measure the second distance.
Subtract:
Measure the first distance.
Press key 9 once.
The device subtracts the second measurement result from the first measurement result.
Measure the second distance.
Repeat if required. The device displays the result in the summary row and the previous value in
the second row.
10.2 Area
See drawing I:
Press key 6 once.
The area symbol appears on the display.
Press key 4 and measure the first distance.
(e.g. length).
Press key 4 and measure the second distance.
(e.g. width).
The device displays the result in the summary row and the respective measured distance to the
next measurement in the second row.
8/70