Mitsubishi WD-73CLL Supplemental Owner's Manual page 22

22 2. TVMenus
Lock, continued
Using TV Locks
After you set the lock, you must use your pass code to:
• View a locked program
View a locked channel
View the locked TV
Cancel the lock
Open the Lock menus
When entering the Lock menu, you will be prompted to
enter a pass code.
To change the pass code, press 9 and LASTat the
same time. Either enter a new pass code to open
the Lock menu and make changes or press EXITto
close the menu.
If any of the locks are turned on and you exit the
menus when prompted for a new code, the old code
and all lock settings will be retained.
If all locks are turned off and you exit the menus
when prompted for a new code, then the previous
code will be erased.
Bypassing TV Locks
If you try to watch a blocked program or channel
or the TV is locked by time, a notice will appear
prompting you for a pass code. To use the TV, input
your four-digit pass code and press ENTER.
To reactivate the locks after using a pass code,
power the TV off and then on.
If a program is blocked, you can still use the TV
without entering a pass code. Change to a channel
airing an allowed program or change to another
device.
If you forget your pass code, you can view the
locked TV without entering your pass code. When
prompted for the pass code, press the number 9 and
LASTkeys on the TV remote control at the same time.
This process temporarily unlocks the TV.
For assistance call 1(800} 332-2119