Mitsubishi WD-60C8 Owner's Manual page 57

Operating NetCommand-Controlled Devices, continued
Key Name in
Special Operation Description and Setup
Learning Screen
Guide Displaying the Disc Menu (DVD or high-defini-
tion disc format)
"Learn" the DISC MENU, TOP MENU, or other key as
named on the original remote in the Guide learn-
ing position.
Displaying the On-Screen Program Guide
(cable box or satellite receiver)
1. "Learn" the
the Guide learning position.
2.
Learn the
original remote in the Page Up and Page Dn
learning positions.
Page Up Using Page Up/Down
Page Dn
If the device's original remote control has separate
keys for Channel Up/Dn and Page Up/Dn, the TV
remote control's CH/PAGE
the two separate keys.
1. "Learn"
positions.
2.
"Learn"
tions.
Enter Enter Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have "enter" functions. One key is for menus and is often labelled
SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand uses
the same ENTER key for both operations.
When ENTER has a menu or guide function or when
the original remote control uses the same key for
menus and channel selection:
Learn the ENTER, SELECT, or OK key in the
NetCommand Enter learning position.
Enter (digits) When ENTER is for channel changes, i.e., the original
remote control has a separate ENTER key for this
function):
Learn the ENTER key for channel selection in the
NetCommand Enter (digits) learning position.
Use this learning position only if the original
remote control has separate keys for Enter in
menus and Enter for channel selection.
Cancel CANCEL as the Cancel or Exit Function
"Learn" the Cancel or Exit function in the
NetCommand Cancel learning position
— The symbol "—" can serve as the separator
(separator) between a digital channel's main and sub-
channel digits, e.g., digital channel 12-1 (main
channel is 12, sub-channel is 1).
"Learn" the channel separator function in the
NetCommand – (separator) learning position.
6. NetCommand IR Control (736 and 835 Series TVs)
GUIDE key on the original remote in
PAGE and PAGE
keys of the
/ key can work like
CHANNEL / in the Channel Up/Dn
PAGE in the Page Up/Dn posi-
/
How to Use
While watching the device, press GUIDE to display the
disc menu.
1. While watching the device, press
display the guide.
2. Press CH/PAGE / to send the Page Up/Dn
commands for the guide.
• Inside the Guide
Press CH/PAGE / to send the Page Up/Dn
commands.
Outside the Guide
•
Press CH/PAGE / to send the Channel Up/
Dn signal.
1. Press MENU or GUIDE to display the device's menu
or guide.
2. ENTER within the menu and NetCommand
Press
will send the Enter signal for menus.
Press digit key(s) and then press ENTER.
NetCommand will send the Enter signal for channel
selection.
1. MENU or GUIDE to display the menu or guide.
Press
—
2. Press CANCEL and NetCommand will send the
Cancel or Exit signal.
Press digit key(s) and press
will send the channel-separator signal.
57
GUIDE to
—
CANCEL . NetCommand