Basic Setup And Operation; Before You Begin - Mitsubishi Electric UNISEN 164 SERIES Basic Owner's Manual

1

Basic Setup and Operation

Package Contents
Please take a moment to review the following list of
items to ensure that you have received everything.
Remote Control
Two AA Batteries
Basic Owner's Guide
Quick Setup Guide
Product Registration
Card
Power Cord
Cable Ties
Stand Screws (40- and
46-inch TVs only)
265 Series. Calibration
Microphone
AA
AA
Installing the Remote Control
Batteries
1.
Remove the remote control's back cover by
gently pressing in the tab and lifting off the cover.
2.
Load the batteries, making sure the polarities
(+) and (-) are correct. For best results, insert
the negative (-) end first.
3.
Snap the cover back in place.
1
2

Before You Begin

1.
Review the important safety, installation, and oper-
ating information at the beginning of this book.
2.
Choose a location for your TV.
• See the stand-installation or wall-mounting
requirements starting on page 5.
• Allow at least four inches of space on all sides
of the TV to help prevent overheating. Over-
heating may cause premature failure of the TV.
• Avoid locations where light may reflect off the
screen.
3.
Install the batteries in the remote control.
4.
Plug the TV into an AC power outlet.
TV power connection
For assistance call 1(800) 332-2119
7
The remote
control
requires two
AA batteries.