Mitsubishi Electric UNISEN 164 SERIES Basic Owner's Manual page 15

A/V Receiver
Most setups require either an optical audio cable or
analog stereo audio cables. To send audio from TV
channels received on the ANT input or devices con-
nected directly to the TV, you must use one of the con-
nections shown below.
The TV makes all audio available in digital and analog
formats:
• Analog audio coming into the TV is available as
output in digital stereo format on the DIGITAL
AUDIO OUTPUT jack.
• Digital incoming audio is available as analog output
on the AVR/SURROUND L and R jacks.
Optical cable
(digital A/V
receiver)
L
A/V receiver back panel
Stereo analog cables
or
(analog A/V receiver)
OPTICAL
OPTICAL
INPUT INPUT
COAXIAL
INPUT
2. TV Connections
A/V Receiver with HDMI Output
Required: One HDMI-to-HDMI cable
This option allows you to view content from devices
connected to an A/V receiver. The A/V receiver can
send audio and video to the TV over a single HDMI
cable. You can use an HDMI connection as described
here in addition to an audio connection from the TV's
audio output. The optional audio connection allows you
to hear, through the A/V receiver, devices connected to
the TV only, e.g., an antenna on the ANT input.
HDMI cable
HDMI OUT
A/V receiver with
HDMI output
Any connection
types
High-definition
DVD player
For assistance call 1(800) 332-2119
TV
Optional
analog or
digital audio
connection
R L
OPTICAL
AUDIO IN
ANALOG AUDIO IN
VCR
DVD player
Cable box
15