Basic Tv Operation - Mitsubishi Electric UNISEN 164 SERIES Basic Owner's Manual

Immersive sound led lcd hdtv with integrated sound projector
Hide thumbs Also See for UNISEN 164 SERIES:
Table of Contents

Advertisement

Basic TV Operation

Picture Settings
1.
To get the best picture under different viewing con-
ditions, set the Picture Mode first before changing
other video settings. See page 24 for a description
of the options.
a. Press VIDEO.
b. Press
until the Picture Mode
option displays.
c. Press
to make one of these selections:
Name
When to Use
Brilliant
Under bright light
Game
With gaming consoles (inputs
named Game or PC only)
Bright
For most daytime viewing
Natural
For most nighttime viewing
2.
Press
to display the name of another adjustment.
3.
Press
to make the adjustment.
4.
Wait a few seconds and
See also these menus:
Menu
Picture > Picture Plus
265 Series. Picture > Perfect
POWER Indicator
POWER
Key
Off
Steady On
Slow Blinking
Fast Blinking
the display will clear.
Page
24
25
LED Color TV Condition
TV is powered off. Normal operation.
None
TV is powered on. Normal operation.
Green
TV powered off, auto-on TV Timer is set.
Green
Normal operation. TV can be turned on at any time.
Software download in progress (applies only if home network is
Green
connected). TV cannot be powered on until complete. Do not
unplug the TV during download.
TV may require service.
Red/
Hold power button on front panel for 10 seconds to reset TV.
Yellow
If LED continues to flash red and yellow after reset, turn off the
TV and unplug it from the AC power source. Wait one minute
and then plug the set back in.
If LED continues to flash red and yellow,
www.mitsubishi-tv.com or call 1-800-332-2119 to receive Autho-
rized Service Center information.
You may be asked to count how many times the LED flashes
each color to assist in troubleshooting.
1. Basic Setup and Operation
Audio Controls
Changing the Audio Output
To switch from the internal TV speakers to an external
sound system:
1.
AUDIO.
Press
2.
Press
to display the
TV Speakers option.
3.
Press
to change.
Changing Audio Settings (TV Speakers Only)
1.
AUDIO.
Press
2.
Press
to display the name of the adjustment you
want. See page 25 for options.
3.
Press
to change.
Controlling Sound Volume
VOL
Press
/
sound level of the TV speakers.
See the full owner's guide at
www.mitsubishi-tv.com for
methods of controlling A/V receiver
volume.
For assistance call 1(800) 332-2119
to adjust the
go to
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unisen 154 seriesUnisen 265 series

Table of Contents