Toyota 2009 Corolla Owner's Manual page 63

Setting and canceling the functions
n
To switch between set and canceled, follow the procedure below:
STEP 1
Vehicles with smart key system:
Close all the doors and switch the "ENGINE START STOP"
switch to IGNITION ON mode. (Perform the step 2 within 10
seconds.)
Vehicles without smart key system:
Close all the doors and switch the engine switch to the "ON"
position. (Perform step 2 within 10 seconds.)
STEP 2
Function
Shift position linked door lock-
* 1
ing function
Shift position linked door
unlocking function
Speed linked door locking func-
*
2
tion
Driver's door linked door unlock-
ing function
*
1
: Vehicles with an automatic transmission only
* 2
: Vehicles with smart key system
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
1-2. Opening, closing and locking the doors and trunk
*
1
I n f o r ma t i o n P r o v i d e d b y :
Shift the shift lever to P or N, and
press and hold the driver's door
lock switch ( or
imately 5 seconds and then
release.
The shift lever and switch posi-
tions corresponding
desired function to be set or can-
celed are shown as follows.
Shift lever
Switch position
position
P
N
1
) for approx-
to the
41