Toyota 2009 Corolla Owner's Manual page 421

5-2. Steps to take in an emergency
Changing "ENGINE START STOP" switch modes and starting the engine
STEP 1
Shift the shift lever to P and apply the brakes.
STEP 2
STEP 3
To change "ENGINE START STOP" switch modes: Within 5
seconds of the buzzer sounding, release the brake pedal and
press the "ENGINE START STOP" switch. Modes can be
changed each time the switch is pressed. (→P. 123)
To start the engine: Press the "ENGINE START STOP" switch
within 5 seconds after the buzzer sounds, keeping the brake
pedal depressed.
In the event that the "ENGINE START STOP" switch still cannot be
operated, contact your Toyota dealer.
Stopping the engine
n
Shift the shift lever to P and press the "ENGINE START STOP" switch as
you normally do when stopping the engine.
Replacing the key battery
n
As the above procedure is a temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery is depleted.
(→P. 343)
404
Touch the Toyota emblem side of
the electronic
"ENGINE START STOP" switch.
An alarm will sound to indicate
that the start function cannot
detect the electronic key that is
touched to the "ENGINE START
STOP" switch if any of the doors
is opened and closed while the
key is touched to the switch.
I n f o r ma t i o n P r o v i d e d b y :
key to the