Toyota 2009 Corolla Owner's Manual page 374

4-3. Do-it-yourself maintenance
After a fuse is replaced
n
If the lights do not turn on even after the fuse has been replaced, a bulb
l
may need replacing. (→P. 357)
If the replaced fuse blows again, have the vehicle inspected by your
l
Toyota dealer.
n If there is an overload in the circuits
The fuses are designed to blow before the entire wiring harness is damaged.
CAUTION
To prevent system breakdowns and vehicle fire
n
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
l Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
l Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
l Do not modify the fuse or the fuse box.
NOTICE
Before replacing fuses
n
Have the cause of electrical overload determined and repaired by your
Toyota dealer, as soon as possible.
356
I n f o r ma t i o n P r o v i d e d b y :