Table of Contents
Advertisement
50
Chapter 4. TV Operation and Features
Remote Control
Overview
Figures 1 and 2, next page
1. Slide Switch: Selects the A/V device to be controlled
by the remote control. Set the slide switch to TV for
operation of the TV, NetCommand-controlled devices,
and IEEE 1394 devices. Control of additional devices
requires programing (see Appendix C, "Programming
the Remote Control.".
2. SLEEP: Sets the TV to turn off within 2 hours. See the
next page for instructions.
3. Digits/Letters: Allow you to tune to a channel by
entering channel numbers; press ENTER for faster
tuning. Use numbers and the —/CANCEL key to enter
digital sub-channels. Also use for entering informa-
tion into menus.
To select letters when naming channels, repeatedly
press the associated number key. The following
special characters are available with the 1 and 0 keys:
1:
!
&
blank space
0:
/
*
-
4. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears FAV and some
menu entries.
5. POWER: Turns TV power on and off.
6. QV (QuickView™): Switches between the current
channel and the last channel viewed.
7. MUTE: Turns TV sound off or on.
8. SPLIT: Turns Split Screen mode on and off.
9. VOL
(Volume Up/Down): Changes sound level.
/
10. CH/PAGE
/
(Channel or Page Up/Down): Scans
up or down through memorized channels. Pages up
and down through screens when used with the TV
Guide On Screen system or ChannelView™.
11 FAV (Favorites): Scans through memorized lists of
favorite channels. See "Channel Menu" in chapter 5,
"TV Menu Settings," for more information.
12. FORMAT: Changes the shape and size of the main TV
picture. When in Split Screen mode, changes the
size of the split images while maintaining their aspect
ratios.
13. LIST: Works like the LIST key for a cable box or satellite
receiver when "learned" for NetCommand or when
the remote has been programmed for the device.
14. INPUT: Displays the Input Selection menu from which
you can select an input source to view, such as an
antenna input (ANT 1/2) or a connected device.
Note: To operate other audio/video devices.
•
See chapter 3, "TV Setup," for NetCommand
"Learning" of device keys.
•
See Appendix C, "Programming the Remote
Control" for instructions on programming.
•
For control of IEEE 1394 devices, see chapter 6.
15.
(Adjust Up/down/Left/Right): Navigate
menus and change settings.
Power Swivel (LT-37132 model only): With no
menu or slider displayed, swivels the TV thirty degrees
left or right. Swivel is not available in Split Screen mode.
16. ENTER: Selects a channel number or menu item.
17. GUIDE: Displays or removes ChannelView™ channel listing
for ANT 1 and ANT 2. With the TV Guide On Screen
system enabled, launches TV Guide On Screen. Dis-
plays DVD disc or top menu for a NetCommand-con-
trolled DVD player.
18. INFO: Displays an on-screen summary of the current
device in use and any broadcast information available,
including current V-Chip information. See chapter 4,
"TV Operation and Features," for details.
19. AUDIO: Selects individual audio settings for adjustment.
20. VIDEO: Selects individual video settings for adjustment,
including Power Swivel (LT-37132 only; see #15.)
21. MENU: Displays the main TV menu using the
on-screen menu system. When a sub-menu is open,
backs up one level.
22. EXIT: Closes all TV on-screen menus and displays and
returns to normal TV viewing.
23. F1–F4:
For devices under NetCommand control: Perform
NetCommand "Learning" to assign functions to F1–F4.
For devices operating independently of
NetCommand: The F1–F4 keys may be able to work
like the A, B, C, D buttons on some cable boxes,
satellite receivers, and DVD players. Program the
remote control for your equipment and test the keys.
See Appendix C, "Programming the Remote Control."
25.
(PAUSE): Freezes a broadcast TV picture when no
Split Screen image is displayed. When Split Screen is
displayed, freezes the sub-picture. See below for use
with recordable media.
Record/Playback Keys
Use any of these methods to enable the recording and
playback functions:
•
program the remote for your DVR, VCR, or DVD
player/recorder and set the slide switch to VCR,
DVD, CABLE, or SAT.
•
Perform NetCommand "Learning" for the device.
•
See chapter 6, "NetCommand Operations," for control
of IEEE 1394 devices.
23.
(RECORD): Records with a VCR, DVR, or DVD
recorder.
24.
(PAUSE): Pauses a VCR or DVD. See above for use
during TV viewing.
25.
(STOP): Stops play of a VCR, DVR, or DVD.
26.
(REVERSE): Rewinds a VCR. Reverse scans a DVR
or DVD.
27.
(PLAY): Plays a VCR, DVR, or DVD.
28.
(FAST FORWARD): Fast forwards a VCR. Forward
scans a DVD or DVR.
Hide quick links:
Advertisement
Table of Contents
