Panasonic CS-RE9RKA Operating Instructions Manual page 12

How to use
MODE
To select operation mode
AUTO mode - For your convenience
• During operation mode selection the power
indicator blinks.
• Unit selects operation mode every 10 minutes
according to setting temperature and room
temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power
indicator blinks during this operation.
COOL mode - To enjoy cool air
• Provides effi cient comfort cooling to suit your
needs.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a
gentle cooling operation.
POWERFUL/
To switch between
QUIET
powerful & quiet
POWERFUL QUIET
POWERFUL: To reach temperature quickly
POWERFUL
• This operation stops automatically after 15
minutes.
QUIET: To enjoy quiet operation
QUIET
• This operation reduces airfl ow noise.
FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is
automatically adjusted according to the
operation mode.
To adjust horizontal airfl ow
direction
• Manually
12
NORMAL
adjustable.
Remote control display
AUTO
HEAT
COOL
DRY
OFF/ON OFF/ON
MODE
TEMP TEMP
POWERFUL/ /
QUIET FAN SPEED
TIMER TIMER
ON ON
1 1
OFF OFF
SET CHECK CLOCK CHECK CLOCK
Auto OFF/ON button
Use when remote control is misplaced or a
malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button
once.
• To use in COOL mode, press and hold the
button until 1 beep is heard, then release.
• To use in HEAT mode, press and hold the
button until 1 beep is heard, then release.
And press again until 2 beeps, then release.
• Press the button again to turn off.
POWERFUL
Remote control receiver
and indicator
(Green)
POWER
(Orange)
TIMER
(Orange)
POWERFUL
(Orange)
QUIET
FAN
SPEED
AIR
SWING
Press and hold for
approximately
AIR SWING
10 seconds to show
temperature setting in
°C or °F.
SET SET
Press to restore the
3 3
2 2
remote control to
CANCEL CANCEL
default setting.
AC RC
RESET
Not used in normal
operations.