Table of Contents
Advertisement
If the remaining ink level is greater than 2.8 in. (70 mm) from the base of the ink tank, continue to use
the printer until the remaining ink level is 2.8 in. (70 mm) from the base of the ink tank so that you
can use all the ink in a new ink pack to refill the ink tank.
If the remaining ink level is 2.8 inches (70 mm) or less, go to the next step.
Note: When the message Refill Ink Tank is displayed on the control panel screen and the
remaining ink level is greater than 2.8 in. (70 mm) from the base of the ink tank, it is time to replace
the ink tank. The ink tank must be replaced because fine dirt, dust, and other foreign material causes
the ink tank's filter to malfunction. The ink tank replacement interval depends on the usage
environment and conditions. Contact Epson Support for information on replacing components.
2. Lift the lock lever for the slider of the chip unit you intend to replace.
91
Advertisement
Table of Contents
