Table of Contents
Advertisement
4
Media information
Displays, from left to right, the selected media (0 indicates RIP settings are in use), platen gap,
media width, and remaining media.
: Platen gap is 1.5
: Platen gap is 2.0
: Platen gap is 2.5
5
Chip unit status
The chip unit status (1) changes from normal (left) to warning or error status (right) if
necessary.
The ink color is shown below (2).
• HDK: High Density Black
• Y: Yellow
• M: Magenta
• C: Cyan
: Chip unit error; check the displayed message and clear the error
: Chip unit is incompatible, or the printer does not recognize it, or the slider is unlocked
: Check the displayed chip unit message
: When not flashing, check the ink level in the ink tank, then replace the chip unit and refill
the ink, if necessary. When flashing, replace the chip unit.
16
Advertisement
Table of Contents
