Clear Cmos Jumper - Gigabyte GA-Z170X-Gaming 5 User Manual

16) THB_C (Thunderbolt
This connector is for a GIGABYTE Thunderbolt
B_
1
17) COMA (Serial Port Header)
The COM header can provide one serial port via an optional COM port cable. For purchasing the optional
COM port cable, please contact the local dealer.
9
10
18) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
Open: Normal
Short: Clear CMOS Values
• Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations).
S F
Add-in Card Connector)
™
Pin No. Definition
1
2
3
4
5
Pin No. Definition
1
1
2
2
3
4
5
_
add-in card.
™
GPIOA
GPIOB
Supports a Thunderbolt
N_-SLP_S3
N_-S4_S5
GND
Pin No. Definition
NDCD- 6
NSIN 7
NSOUT 8
NDTR- 9
GND 10
- 21 -
add-in card.
™
NDSR-
NRTS-
NCTS-
NRI-
No Pin
F_USB3 F