8
ASSEMBLING AND PREPARING
Detaching the Stand Base
1
Place the screen face down.
CAUTION
y
To protect the screen from scratches, cover the
surface with a soft cloth.
2
BodyTurn the screws on the Stand Base to the
left to detach the Stand Base from the Stand
Body.
CAUTION
y
The components in the illustrations may differ from
the actual product.
y
Do not carry the monitor upside down, as this may
cause it to fall off its stand and result in damage or
injury.
y
To avoid damaging the screen when lifting or
moving the monitor, only hold the stand or the
plastic cover. This avoids putting unnecessary
pressure on the screen.
Installing on to a Table
1
Lift the monitor and place it on the table in an
upright position.
Place at least 10 cm away from the wall to
ensure sufficient ventilation.
10 cm
10 cm
2
Connect the Power Cord to a wall outlet.
3
Press the
(Power) button on the bottom of
the monitor to turn it on.
CAUTION
y
Disconnect the power cord first, and then move
or install the Monitor set. There is risk of electric
shock.
10 cm
10 cm