Boom Stand; Dual-Arm Boom Stand - Vision SX80 User Manual

ASSEMBLY

Boom stand

Place base on a flat and even surface.
Insert the vertical bar
tighten screws.
Slide clamp over the vertical bar and secure.
Slide horizontal bar
Attach the focusing arm mount
secure.
Attach the focusing arm
arm mount and secure.
Position and secure head.

Dual-arm boom stand

Secure bench mount clamp
Slide the securing collar
vertical bar and secure.
Slide dual-arm & clamp assembly
over the vertical bar and secure.
Connect focus assembly
focus arm link
screw at the back and the nut at
the bottom until secure.
Insert head assembly
focus assembly and secure.
6
SX80/SX100 Stereo Zoom Microscope
into support and
through the clamp and secure.
to the horizontal bar and
to focusing
or platform (not shown) to work surface.
over the
to the
and tighten the
into the
www.visioneng.com/support