ASSEMBLY
Head attachment
ASSEMBLY
Ensuring all components are clean and dust-free, attach the
binocular head as follows:
Loosen the securing screw
Lower the head assembly into the stand's head location ring
Locate the binocular head
secure it in place with the hexagonal key
Tighten the securing screw.
Screw the objective lens
Warning: With the head in place, always support the column
and base when moving the instrument.
Eyepiece attachment
Remove the protective caps
tubes
.
Insert the eyepieces
The rubber cups
interference caused by ambient lighting but can be
removed when wearing glasses.
4
SX80/SX100 Stereo Zoom Microscope
.
on to the zoom body
.
up into the zoom assembly.
from the eyepiece
into the eyepiece tubes.
on the eyepieces are to reduce
.
and
www.visioneng.com/support