NETmc Marine 73fifty Series User Manual page 9

Operating buttons/On-off switch
For details on how to operate the 73fifty see Section 5 below. Please note that the screen has a
separate on/off button.
Capture button
This button enables the capture of still pictures during playback, recording or when the machine has
stopped.
USB socket
This USB interface, together with the supplied software, enables the transfer of files from the 73fifty
to any Windows PC or laptop.
Input sockets
Connect the video and audio sources which are to be recorded here.
Output sockets
These sockets enable video and audio connections to a monitor for video playback.
Note: The 73fifty operates in a similar manner to a domestic video recorder.
During video playback the picture visible on the monitor is that which has been recorded by
the 73fifty.
When the unit is idle or recording, the image shown on your monitor via these sockets is a
pass-through signal (i.e. is identical to the input signal.)
Built-in Overlay
Overlay can be built in, as an optional extra, in the 73fiftyPeli unit.
See the separate guide for further details on the Overlay function.
Electrical
The units operate from 90 to 260 VAC input.
Lamp output 0-24v DC variable.
Camera output typically 24v DC
Camera signal should be via co-ax unless unit has been ordered specifically with twisted pair line
drivers – this is indicated on the product bar code.
It is important to plug in all video and audio input / playback / pass-
through connections before switching on the 73fifty.
NETmc Marine 73fifty Manual Rev 5.8 July 2011
9 of 38