Related Manuals for NETmc Marine FOUR264
Summary of Contents for NETmc Marine FOUR264
- Page 1 USER GUIDE FOR NETmc MARINE Four264 DVR Rev. 2 Firmware 1.4.7 August 2016 NETmc Marine Four264 Manual-Rev.1 August 2016 1 of 16 © NETmc Marine Ltd 2016...
-
Page 2: Table Of Contents
Set-up ............................5 Recording............................ 6 Software Settings ........................8 File Save Setup........................... 9 Full Screen..........................10 Integrated Overlay Option ......................12 How to contact NETmc Marine Support..................15 Technical Specifications....................16 NETmc Marine Ltd New Deer, Turriff Aberdeenshire AB53 6TL TEL. -
Page 3: Introduction
The NETmc Marine Four264 is our latest entry level digital video recorder. Based on our proven X-Ops technology, the Four264 is easy to use and has the ability to record directly to removable storage devices or to a network location. The user interface is simple and intuitive, and allows the user to take still images without interfering with the main video recording files. -
Page 4: Back Of The Unit
– choice of 3 Line out / headphones types (HDMI, DVI-D, Mic. in to PC analogue VGA) 4x USB 2.0 sockets (2 required for keyboard / mouse NETmc Marine Four264 Manual-Rev.1 August 2016 4 of 16 © NETmc Marine Ltd 2016... -
Page 5: Set-Up
Four264 DVR. THIS EQUIPMENT MUST BE EARTHED. Mount the Four264 in a suitable rack mount system. Connect the power supply. Note: this unit must be earthed. Note (2): we highly recommend connection to a UPS (uninterruptible power supply) to prevent data loss. -
Page 6: Recording
Recording A shortcut on the desktop will launch the software which controls the Four264 Once the program has started, the operation controls are displayed. From here the user can start and stop recording, take still images (snapshots) and/ or video clips and enter the set-up screen. - Page 7 The image on the screen shows the video signal that is being input to the Four264. Once the desired footage has been recorded, simply click on the STOP button to end recording.
-
Page 8: Software Settings
ALWAYS remember to apply or the changes won’t be saved. NETmc Marine Four264 Manual-Rev.1 August 2016 8 of 16 © NETmc Marine Ltd 2016... -
Page 9: File Save Setup
7. Ticking these boxes will add time/date to the file name. It is strongly recommended to do this as it ensures that all files will have unique names. Example file save path: V:\Video\LiveVideo\GRABS\Client\FW1\Flange4 NETmc Marine Four264 Manual-Rev.1 August 2016 9 of 16... -
Page 10: Full Screen
In full screen, the controls can be set to be more transparent when idle. This is configured in the setup page by clicking on SETUP FADEIN/OUT NETmc Marine Four264 Manual-Rev.1 August 2016 10 of 16 © NETmc Marine Ltd 2016... - Page 11 If the controls appear lost, use ALT + TAB to bring them back to the top. NETmc Marine Four264 Manual-Rev.1 August 2016 11 of 16 © NETmc Marine Ltd 2016...
-
Page 12: Integrated Overlay Option
8. Integrated Overlay Option Integrated overlay is provided as an additional option in Four264 DVRs: If overlay is fitted, this cable must be plugged in at the rear of the unit as shown: When overlay is fitted, there is a push button switch on the rear of the unit to toggle overlay power on/off. - Page 13 Additionally, all the pages can be saved to disk – so operators can have sequences of custom pages saved on disk for each client – saving editing or retyping between jobs. NETmc Marine Four264 Manual-Rev.1 August 2016 13 of 16...
- Page 14 NETmc Marine Four264 Manual-Rev.1 August 2016 14 of 16 © NETmc Marine Ltd 2016...
-
Page 15: How To Contact Netmc Marine Support
How to contact NETmc Marine Support Should any problems occur with your Four264 DVR that are not addressed by this manual please contact our Support Team: Email: support@netmcmarine.co.uk. Tel: +44 1771 644001 Should your support requirement be outside office hours, please send an email which will be forwarded to one of the support engineers. -
Page 16: Technical Specifications
After overnight road freight the units should be left at room temperature for 24 hours before powering on. After air freighting the units should be left at room temperature for 48 hours before powering on. NETmc Marine Four264 Manual-Rev.1 August 2016 16 of 16...