Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for NETmc Marine Four264
Summary of Contents for NETmc Marine Four264
- Page 1 USER GUIDE FOR NETmc MARINE Four264 DVR Rev.0 Firmware 1.2.32 October 2014 NETmc Marine Four264 Manual-Rev.0 October 2014 1 of 13 © NETmc Marine Ltd 2014...
-
Page 2: Table Of Contents
Recording ..........................5 Software Settings ........................8 How to Change where to save the Video ................... 9 Integrated overlay option ......................10 How to contact NETmc Marine Support ................... 12 Technical Specifications ......................13 NETmc Marine Ltd New Deer, Turriff... -
Page 3: Introduction
The NETmc Marine Four264 is our latest entry level digital video recorder. Based on our proven X-Ops technology, the Four264 is easy to use and has the ability to record directly to removable storage devices or to a network location. The user interface is simple and intuitive, and allows the user to take still images without interfering with the main video recording files. -
Page 4: Back Of The Unit
– choice of 3 Line out / headphones types (HDMI, DVI-D, Mic. in to PC analogue VGA) 4x USB 2.0 sockets (2 required for keyboard / mouse NETmc Marine Four264 Manual-Rev.0 October 2014 4 of 13 © NETmc Marine Ltd 2014... -
Page 5: Set-Up
Live video images should be displayed on screen. Recording A shortcut on the desktop will launch the software which controls the Four264 Once the program has started, the operation controls are displayed. From here the user can start and stop recording, take still images (snapshots) and/ or video clips and enter the set-up screen. - Page 6 The image on the screen shows the video signal that is being input to the DVR. Once the desired footage has been recorded, simply click on the STOP button to end recording. NETmc Marine Four264 Manual-Rev.0 October 2014 6 of 13...
- Page 7 To resume logging, simply click the RECORD button again. The system will automatically create a new file, automatically named as per the configuration in the SETUP page. NETmc Marine Four264 Manual-Rev.0 October 2014 7 of 13 © NETmc Marine Ltd 2014...
-
Page 8: Software Settings
ALWAYS remember to This is the only bit that you apply or the changes won’t need to change. be saved NETmc Marine Four264 Manual-Rev.0 October 2014 8 of 13 © NETmc Marine Ltd 2014... -
Page 9: How To Change Where To Save The Video
7. These tick boxes add the date and time to the file name. This makes it easier to locate the files after the survey has been complete. ALWAYS have these ticked. NETmc Marine Four264 Manual-Rev.0 October 2014 9 of 13... -
Page 10: Integrated Overlay Option
Integrated overlay option Integrated overlay is provided as an additional option in Four264 DVRs: If overlay is fitted, this cable must be plugged in at the rear of the unit as shown: When overlay is fitted, there is a push button switch on the rear of the unit to toggle overlay power on/off. - Page 11 The old information will remain onscreen. 4. These Drop Down boxes are used to choose the location for the time and date to be displayed. Once selected the time and date will be displayed onscreen. NETmc Marine Four264 Manual-Rev.0 October 2014 11 of 13...
-
Page 12: How To Contact Netmc Marine Support
How to contact NETmc Marine Support Should any problems occur with your Four264 DVR that are not addressed by this manual please contact our Support Team: Email: support@netmcmarine.co.uk. Tel: +44 1771 644001 Should your support requirement be outside office hours, please send an email which will be forwarded to one of the support engineers. -
Page 13: Technical Specifications
After overnight road freight the units should be left at room temperature for 24 hours before powering on. After air freighting the units should be left at room temperature for 48 hours before powering on. NETmc Marine Four264 Manual-Rev.0 October 2014 13 of 13...