Connecting To A Dvd Player - Mitsubishi Electric MLM400 User Manual

Connections
Connecting your DVD player to your LCD monitor will enable you to display your DVD video.
Refer to your DVD player owner's manual for more information.
• To connect the RGB 3 DVD/HD In connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC-
to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided).
Some DVD players may have different connectors, such as Cr/Pr, Y and Cb/Pb.
Select [DVD/HD] input mode from the INPUT button.
When connecting one or more LCD monitors, use the RGB 3 OUT connectors (BNC).
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 2] or [AUDIO 3] from the AUDIO INPUT button.
LCD monitor
LCD monitor (second monitor)
–continued

Connecting to a DVD Player

To D VD Component video output
DVD player
BNC x 3
To RGB3 DVD/HD IN
EXIT INPUT MUTE
15
BNC x 3