Connecting A Dvd Player With Component Out/Hdmi Out/Dvi Out; English - Mitsubishi Electric MDT521S User Manual

Connecting a DVD Player with component out / HDMI out / DVI out
Connecting your DVD player to your LCD monitor will enable you to display DVD video.
Refer to your DVD player owner's manual for more information.
Connect the LCD Monitor to a DVD Player
• To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will
need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided).
Select DVD-HD from the INPUT button on the LCD monitor or YPbPr button on the remote control.
• To connect the RGB 1 IN connector (HDMI) on the LCD monitor, use a HDMI cable.
Select RGB 1 from the INPUT button on the LCD monitor or HDMI button on the remote control.
Select the "HDMI INPUT MODE" to "HDMI-HD". (See page 31)
• To connect the RGB 2 IN connector (DVI-D) on the LCD monitor, use a DVI-D cable.
Select RGB 2 from the INPUT button on the LCD monitor or DVI-D button on the remote control.
Select the "DVI INPUT MODE" to "DVI-HD". (See page 31)
• The AUDIO IN 1, 2, 3 or HDMI can be used for audio input. For connection, select AUDIO 1, 2, 3 or HDMI from the AUDIO
INPUT button. You can select HDMI only when RGB 1 or 2 is selected.
BNC x 3
DVD Player
To DVI-D or DVI-I output
Monitor
DVI-D or DVI-I

English-18

To video output
BNC x 3
BNC-RCA
adapter
RCA
DVI-D HDMI
DVD Player
To audio output To audio output
L R
RCA
DVD Player
HDMI
To HDMI output