DIGISYNTHETIC DS216B Instruction Manual page 9

Operation Instruction
Each channel include a separate Limiter, it includes: threshold LEVEL (-20dB~+15dB),
attack time (1~100ms), Hold time (0~100ms), Decay time (10~1000ms).
H. Name of channel: Rotate Param to change the channel name.
I. Input signal (Signal source selecting )
In this menu, rotate
Note: In output menu ( OpXX ), push "Gain" again to change output channel
( Op1... Op6, Op1.....Op6 )
J. Copy function in channels
Press "enter" to enter source output selecting:
I n this menu, rotate
Press ENTER
rotate "Param" or press PREV, NEXT to change target output.
In this menu,
Press "ENTER" to confirm channel copy.
The prameters that can be copied in channels include all above parameters from
A-H points, no copy for channel sources.
8 8
Op2
Name: Low
Op4 High
source: sum A+B
"Param" to change current channel.
Copy Output Data
[ENTER] to Copy
Source Output: [1]
Param or press PREV, NEXT to change source output.
to enter target output.
Source Output: [1]
Target Output: [2]
Source: 1 Target: 2
[ENTER] to Confirm
Name
source