Operation Instruction; Xover Submenu; Security Submenu - DIGISYNTHETIC DS216B Instruction Manual

1. Xover Submenu

Push "MENU" button, use "BACK" "NEXT" "ENTER" to select X-OV ER submenu,
Xover menu includes as below:
Load a xover: recall a stored model.
Design a xover; design a xover model, include mode type, stereo link control,
input channel select.
Store a xover: Store all output setting of a X-OVER. There are 16 user memories.
Each memory can have a name contains 16 characters. If the memory name is
not edited, it is stored under the corresponding mode name.
Erase a xover: Delete a stored model.

2. Security submenu

Push MENU button, select Security Submenu by "BACK" "NEXT", "ENTER"
The locking model as follows:
Change only: Parameters can be viewed, can not be adjusted. MUTE is valid
Change +View: Parameters can not be viewed, can not be adjusted. MUTE is valid.
Change +Mutes: Parameters can be viewed, can not be adjusted. MUTE is not valid
Everything: Parameters can not be viewed, can not be adjusted. MUTE is not valid.
Select a lock type and push "Enter" button.
A. Push "BACK" & "NEXT" to shift the cursor, rotate <PARAM> to change the character.
B. Push "ENTER" to confirm the password and display as follows.
C. Repeat procedure A and push ENTER button.
D. System is locked when log in with same password successfully, or the locking
operation is invalid.
MAIN MENU:............
Xover Sub-Menu
MAIN MENU:............
Xover Sub-Menu
Enter Security Code
[ ]
1234
Confirm Security Code
[ ]
1234

Operation Instruction

5 5