Let's Talk Technical - Vax VPW2BC User Manual

Let's talk technical

IMPORTANT: Always rinse fresh water through your pressure washer and accessories for 1 minute after using
solution to prevent blockages.
Maintenance
To access water filter unscrew water
inlet connector and remove.
CAUTION
Before carrying out any maintenance make sure the machine is switched off and unplugged.
IMPORTANT: If using the pressure washer with water from a water butt, the water filter will need
to cleaned more frequently.
IMPORTANT: Before storing your machine always make sure no water remains in the pressure washer, hose/
accessories. Once machine is switched off and before removing the nozzles, lance or trigger handle always squeeze
the trigger until no more water comes out, to prevent frost damage. Keep in a dry place above zero degrees and out
of the reach of children.
Storage
Always store tools, power cord and pressure hose into allocated storage slots.
Removing a blockage in the lance and nozzles
To remove the lance from trigger
handle firmly push and twist
the lance anti-clockwise, when
unlocked pull to remove.
To remove water filter, pinch the
inner water filter tab with pliers
and gently pull.
To remove the nozzles press the
nozzle release button and pull.
Water filter can be rinsed under
running water periodically.
To remove the lance from the trigger
handle firmly push and twist the lance
anti-clockwise. When unlocked pull
to remove.
Insert the nozzle cleaning tool into the
end of lance and nozzles to remove
any dirt or debris.