I Feel - Mitsubishi MSZ09UN Operating Instructions Manual

I FEEL... AUTO OPERATION
With the " (I FEEL...)" auto operation mode,
the optimum room condition can be set automati-
cally with a one-touch operation.
˚C
CLOCK
AMPM
AMPM
TOO TOO
ON/OFF
WARM COOL
FAN STOP
I FEEL COOL
VANE START
HEAT DRY
MODE HR.
MIN.
RESET CLOCK
Description of "I FEEL..." mode
Details of operation
According to the room temperature when the operation starts, the opera-
tion mode is automatically set to COOL, DRY or HEAT. However, when
operation is started again within 2 hours after it is stopped, the same
operation mode before the operation is stopped is selected. The opera-
tion mode selected first is not changed even if the room temperature
changes. If the operation mode does not match the room condition, se-
lect the appropriate operation mode by pressing the
Details of auto operation
Room temperature Operation mode
when started
About 77 °F or higher
About 77 °F - 73 °F
About 73 °F or lower
•
To start operation:
I
•
To stop operation:
I
•
I
•
I
When "
the
Each time the button is pressed, the operation mode is
changed in sequence:
→
MODE
button.
Target temperature
(initial state)
COOL About 75 °F
DRY —
HEAT About 79 °F
ON/OFF
Press the button.
When the " (I FEEL...)" mode is selected, the air
conditioner is automatically controlled at the optimum
temperature.
ON/OFF
Press the button.
If you feel slightly warm:
TOO
WARM
Press the button to lower the tempera-
ture.
One press lowers the temperature by about 2 °F.
If you feel slightly cool:
TOO
COOL
Press the button to raise the tempera-
ture.
One press raises the temperature by about 2 °F.
(I FEEL...)" is not selected, press
MODE
button until it is set.
(I FEEL...) →
(HEAT)
FAN
I FEEL COOL
VANE
HEAT DRY
MODE
ECONO COOL
(COOL) →
(DRY)
STOP
START
HR.
MIN.
Room temperature:
About 77 °F or higher
→ COOL
About 77 °F - 73 °F→ DRY
About 73 °F or lower
→ HEAT