Connecting To A Tv; Connecting To An Amplifier/Receiver - Panasonic DMP-BDT460 Owner's Manual

Connecting to a TV

Connect the power supply cord after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power outlet.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended
that you use Panasonic's HDMI cable. When outputting 1080p or 24p (4K) signal, please use HDMI
cables 5.0 meters (16.4 ft.) or less.
To an AC outlet
AC power supply cord
(supplied)
≥ [BDT460] : Use HDMI AV OUT MAIN terminal.
≥ This unit consumes a small amount of AC power (
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.

Connecting to an amplifier/receiver

Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
HDMI AV OUT
[BDT460]
[BDT361]
[BDT360]
≥ [BDT460] : Use HDMI AV OUT MAIN terminal.
≥ Set "Digital Audio Output" (
≥ When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV, then
connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to
5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of "(ARC)"
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV's sound through the amplifier/receiver.
[BDT460]
[BDT361]
[BDT360]
HDMI cable
Amplifier/receiver
25).
HDMI cable
34) even when turned off in standby mode. For
HDMI cable
HDMI OUT
HDMI IN
(ARC)
HDMI IN
HDMI IN
(ARC)
SQT0080
9